Product Center

Writing board paint (HPE)

The company has developed a multi-purpose board with high performance, low pollution and long service life. It has obvious wear resistance, can write 100000 times continuously, the paint film will not have obvious changes, and is easy to clean

The unique advantages of the writing board coating system are reflected in the following aspects:

A. Smooth writing effect

B. Reflectivity is 20% higher than ordinary plate

C. Clearer picture effect

D. Mainly used for teaching

Color writing board paint has a simple color selection system, mainly white board and green board colors

Steel plate is the main substrate for writing board coating

The application of writing paint system is mainly applied in office buildings, teaching and research rooms

Test items	Test indicators	Experimental method	Test items	Test indicators	Experimental method
Fineness	≤ 100um	GB/T 1724-89	T-bend	≤ 6T	NCCA II-19
Coating color and appearance	Flat and smooth, with uniform color	GB/T 11186. 3	MEK wipe resistance	≥ 100 times	NCCA II-19
Chromatic aberration	△E≤ 2.0	Compared with standard plate	Impact	None	GB/T 1732-1993
Gloss	Do as required	GB/T 9754-1988	Pencil hardness	≥ 4H	GB/T 6739-1996
Hundred-grid test	None	GB/T 9286-1998	Salt fog resistance (with bottom 2000Hrs)	≤ 2mm, scribing on one side	GB/T 1724-1998
Dry film test	Do as required	GB/T 1724-1998	Curing temperature (plate temperature)	224-241℃	Thermometric paper

Welcome to your message consultation

Submit

Related Products

Polyester coating (PE)

Polyester coating is a kind of super durable polyester coating, which can provide good outdoor durability under extreme weather conditions and resist the sun, rain and other natural factors. When the installation environment has no special requirements for the coating and needs to pay more attention to the cost factors, this type of secondary coating coil coating system is the perfect choice

Polyester coating for household appliances (DA)

The polyester coating for household appliances is the polyester coating required by RHOS, which provides good durability and strong antifouling ability under indoor conditions. When the installation environment has no special requirements for the coating and needs to pay more attention to cost factors, this type of secondary coating coil system is the perfect choice

Fluorocarbon roller coating&spray coating (PVDF)

High-grade fluoropolymer coating system developed by the company and prepared by 70% PVDF professional resin, ceramic pigment and other selected inorganic pigments. Its excellent quality and appearance have been verified by many construction engineering cases at home and abroad, and its excellent performance fully meets the standards of the Building Manufacturers Association. The strong chemical bonding force of fluorocarbon coating system can effectively resist ultraviolet rays, thus ensuring the durable light and color retention, excellent powdering resistance and degradation resistance of the coating. Fluorocarbon coating can provide long-term and effective protection for your building exterior surface, and is the preferred coating brand of architectural designers and aluminum suppliers in the world.

Acrylic paint

Acrylic coating is mainly used for pretreatment of aluminum plate and aluminum foil

Writing board paint (HPE)

Adhesive universal back paint

It is a general common back paint, which has been used for many years. The product will have a very strong cost performance ratio, can meet the performance requirements of large customers, can run at high speed, and can be used with polyester, fluorocarbon and other coatings from various suppliers

Ink for coiled material

This series of products is made of high-grade imported resin and high-grade pigment after careful grinding and processing. In order to meet the requirements of customers for roll printing, it solves the technical problem of direct roll printing on PE materials without any treatment

General thinner for coiled material

The company has a complete range of products, mainly including DBE, 100 #, PMA, DCC and other products, and has independently developed and produced a number of domestic color steel and color aluminum universal diluents

Contact Information

0550-4351008 / 0550-4358200

Address: Luqiao Salt Chemical Industry Park, Dingyuan County, Chuzhou, Anhui Province
Contact: Chen Wu Ruoyu
QQ：1154101986
Mobile：+86-15051123575
WeChat：Chenwuruoyu

Mobile Website